China, Japan, South Korea, North Korea, Mongolia, Hong Kong-China, Macao-China, Taiwan-China
China, Japan, South Korea, North Korea, Mongolia, Hong Kong-China, Macao-China, Taiwan-ChinaProduct Description
CE Certificated High Quality Low E Insulated Glass for Construction
Low E Insulated Glass for Construction
High strength
Super safe
Durability
Aesthetics
Soundproofing
Energy Saving
Low E Insulated Glass for Construction
Product Paramenters
What is a Low-E Window and What Makes it Energy Efficient?Low-E, or low-emissivity, glass was created to minimize the amount of infrared and ultraviolet light that comes through your glass, without minimizing the amount of light that enters your home. Low-E glass windows have a microscopically thin coating that is transparent and reflects heat. The coating is even thinner than human hair! The Low-E coatings keep the temperature in your home consistent by reflecting the interior temperatures back inside.There are several factors used to measure the effectiveness of glass with Low-E coatings: * Solar Heat Gain Coefficient (SHGC): This is the fraction of incident solar radiation that is admitted through the window. This can be either directly transmitted and absorbed or radiated inward. * U-Value: This is the rating that is given to a window based on how much heat loss it allows. * Visible Light Transmittance (VLT): The measure of how much visible light passes through the glass. * Light to Solar Gain: The ratio between the window’s visible light transmittance and its Solar Gain Coefficient rating.Types of Low-E Coatings 1. Passive Low-E Coatings (Hard-Coat): The passive Low-E coatings are manufactured using the pyrolytic process, which creates a pyrolytic coating. The coating is then applied to the glass ribbon while it is being produced on the float line, which causes the coating to “fuse” to the hot glass surface. This fusion creates a strong bond, or “hard-coat,” that is very durable. 2. Solar Control Low-E Coatings (Soft-Coat): Solar control Low-E coatings are manufactured using the Magnetron Sputtering Vapor Deposition (MSVD) process, which means the coating is applied off-line to pre-cut glass in a vacuum chamber at room temperature. This coating, which is also referred to as “soft-coat,” needs to be sealed in an insulated glass (IG) or laminated unit. The soft-coat has lower emissivity and superior solar control performance. This coating offers the highest performing solar control.
What is Insulated Glass:Insulating glass (also referred to as “insulated glass”) refers to two or more lites of glass sealed around the edges with an air space between to form a single unit. Commonly referred to as an “IGU,” insulating glass is the most effective way to reduce air-to-air heat transfer through the glazing. When used in conjunction with low-E and/or reflective glass coatings, IGUs become an effective means to conserve energy and comply with building codes. The most common architectural insulating glass unit configuration is 1/4" glass, 1/2" air space and 1/4" glass.Components of Insulated Glass Units* Glass – The glass in IGUs can be a range of thicknesses or type. Laminated or tempered glass may be used in areas where safety or strength is a priority. IGUs can also contain up to three panes of glass where extra heat or sound insulation is required. Thicker glass is more expensive but more efficient.
* Spacer – IGUs utilize a spacer that separates the two glass panes where they meet at the edges / window frame. These spacers usually have some sort of desiccant to absorb moisture between the panes and prevent fogging. The width of the spacers depends on the gas used for insulation and window type. Generally, the wider the spacer, the more efficient (and expensive) the window.
* Window Frame – Insulated glass is used in many different types of windows where efficiency is required: double hung windows, picture windows, casement windows and skylights use insulated glass to prevent heat loss.
* Gas – The gas used between the glass panes varies with each manufacturer. In general, an inert gas such as argon, krypton or a mixture of both creates the insulating barrier between the indoors and outdoors.
Certifications
Verification Failed:
Verification Failed:
Comments
Feedback from Buyer