x
Post
Consult
IM
Feedback
Top
Share
Product Description
PRODUCT FEATURES
It is formulated with modified acrylic resin, toughness, pigments and solvents such as cool, phenol, and benzene.
| PACKAGING | Packaging weight: 20kg/bucket
Pack and store environment should be dry, cool, well ventilated, avoid high temperature, and keep away from fire. The packaging container must be kept tightly closed. The effective storage period is 12 months.
|
| DESCRIPTION |
It can be dried naturally, has good gloss and outdoor durability; Good physical properties, chemical properties and aging resistance, it has the characteristics of water resistance, high hardness, and good gloss and color retention.
|
| FEATURES |
Operation conditions: the temperature of the substrate is not lower than 1,000 degrees Celsius, and at least 3 degrees Celsius higher than the dew point of the air (temperature and relative humidity should be measured near the substrate). Good ventilation is usually required to ensure that the paint is properly dried.
Operation method: airless spray or air spray, high pressure airless spray is recommended. The viscosity and air pressure of the paint should be adjusted when using air spraying. The thinner should not exceed 10%, otherwise the coating performance will be affected. Brushing is recommended for pre-coating and small area coating, but it must reach the specified dry film thickness
|
Technical Data Sheet
APPLICATION FIELD
Using in thousands of light industries, electrical appliances, machine tools, ship hulls, ship superstructures, power plants, steel and steel, chemical industries, bridges, containers, hydraulic steel gates, dry gas tanks and other land-based steel structures for protection and Use of decorative finish
STORAGE
Recommends storage in a cool, well ventilated space away from heat sources. Keep tightly lidded. Keep away from reducing agents and strong oxidizing agents. Take precautions against static electricity discharges. See State and Federal Regulations as to storage.
DISPOSAL
Contaminated absorbent to be disposed of in a secure land fill in accordance with local bodies , state and or federal authorities.
PRODUCT WARNING
Maiqi Coatings has no control over the use or storage of this product and therefore does not accept any liability in this regard. Any verbal advice given should not be regarded as authoritative information. This information is subject to change without notice, therefore all applicators should ensure they have current information. This product is intended for the use only of skilled tradesmen and where applicable, statutory licensed tradesmen experienced and trained in the use of this product. This product is warranted to be of uniform quality within the manufacturer’stolerance. This manufacturer has no control over the use or misuse of this product, therefore no warranty rests or implied, is or can be made either as to the effects of such use. The manufacturer’sobligations shall be limited to replacing product proving to be defective.
Floor Coating
| Lowest | highest | epresentative | |
| Dry film thickness (μm) | 30 | 50 | 40 |
| Wet film thickness (μm) | 65 | 109 | 87 |
| Theoretical coating rate (m2 /L ) | 15.3 | 9.2 | 11.5 |
Verification Failed:
Verification Failed:
Comments
Feedback from Buyer