Norway, Sweden, Finland, Denmark, Iceland, Aland Islands, Bonaire,SaintEustatiusAndSaba, Faroe Islands, Spain, Portugal, Andorra, Italy, Greece, Malta, Vatican, San Marino, Slovenia, Croatia, Albania, Romania, Bulgaria, Serbia, Macedonia, Bosnia and Herzegovina, Montenegro, French Southern Territories, Canada, United States, Mexico, Bahamas, Cuba, Jamaica, Haiti, The Dominican Republic, Saint Kitts and Nevis, Antigua and Barbuda, Commonwealth of Dominica, Saint Lucia, Saint Vincent and the Grenadines, Barbados, Grenada, Trinidad and Tobago, Anguilla, Bermuda, Greenland, Guadeloupe, Jersey, Cayman Islands, Martinique, Montserrat, Saint Pierre And Miquelon, Puerto Rico, Sint Maarten, United States Minor Outlying Islands, U.S.Virgin Islands
Norway, Sweden, Finland, Denmark, Iceland, Aland Islands, Bonaire,SaintEustatiusAndSaba, Faroe Islands, Spain, Portugal, Andorra, Italy, Greece, Malta, Vatican, San Marino, Slovenia, Croatia, Albania, Romania, Bulgaria, Serbia, Macedonia, Bosnia and Herzegovina, Montenegro, French Southern Territories, Canada, United States, Mexico, Bahamas, Cuba, Jamaica, Haiti, The Dominican Republic, Saint Kitts and Nevis, Antigua and Barbuda, Commonwealth of Dominica, Saint Lucia, Saint Vincent and the Grenadines, Barbados, Grenada, Trinidad and Tobago, Anguilla, Bermuda, Greenland, Guadeloupe, Jersey, Cayman Islands, Martinique, Montserrat, Saint Pierre And Miquelon, Puerto Rico, Sint Maarten, United States Minor Outlying Islands, U.S.Virgin IslandsProduct Description
Installation and important notes
1. Place the machine on the horizontal floor, and the environment should keep in the suitable temperature. Check the power supply corresponds to the machine requires and make sure the wires are connected properly
!!! Warning: the machine must be earthed properly!
2. After checked by professional electrician, turn on the power switch on the right side of the machine and check whether the indicator lamp is on. The rotation direction must be consistent with the mark shown on bowl. Or else shut off the power and change another power wire.
3. Raise the safe-cover, the machine will be stopped and cannot be working. If you want to start the machine, you should lay down the safe-cover at its original position and press start button.
4. Raise the safe-cover and put adequate flour into the bowl each time( do not beyond the rated maximum)
5. fill the bowl with water whose weight is 45%-50% of the required flour
6. Put down the safe-cover and start the machine
7. When the dough has been kneaded (probably for 8 minutes), please push stop-button to stop the machine. Then open the safe-cover and take out the dough.
!!Warning:
Do not put hands or add something into bowl when the machine begins to work!
Do not grab dough with hands when the machine begins to work!
Do not clean or lubricate the machine during its working!
Ⅲ. Maintenance
Pay attention to that all measures should be taken after having unplugged during service and maintenance. The motor and other parts should be dismounted gradually. It should be cleaned and lubricated the chains and bearings regularly
Advice:
1. Please read the instruction carefully before operating the machine.
2. Clean the machine and fill lubricate oil into the lubricate points after using it.
3. Do not start the machine repeatedly and do not run the machine continuous in order to extend the durability of the machine.
4. Lubricate the chains and main moving parts once a month.
5. Check the tension of the belts and chains every six months.
6. Check the electric circuit once a year.
7. Forbid washing the machine with pipe.
Package & Shipping
Verification Failed:
Verification Failed:
Comments
Feedback from Buyer