4B Finish Stainless Steel Sheet
Standard , cold rolled
4B is produced with short, parallel polishing lines. These lines extend uniformly along the length of the sheet. It is obtained by mechanically polishing with gradually finer abrasives.Depending on requirements, the final finish can be between 120 to 320 grit. High grit numbers create finer polishing lines and more reflective finishes. The surface roughness is typically Ra 25 micro-inches or less. This is a general-purpose finish.
Available Size
Grade | Type | Thickness (mm) | Width (mm) | Length (mm) | ||||
---|---|---|---|---|---|---|---|---|
1219 | 1524 | 2438 | 3048 | 3657 | 4000 | |||
201 | Sheet | 0.5 – 3.0 | ● | ● | ● | ● | ● | ● |
304 | Sheet | 0.5 – 3.0 | ● | ● | ● | ● | ● | ● |
316 | Sheet | 0.5 – 3.0 | ● | ● | ● | ● | ● | ● |
439 | Sheet | 0.5 – 3.0 | ● | ● | ● | ● | ● | ● |
Special dimension is acceptable upon request.
Customized specific cut to length is acceptable.
PVC / Fiber Optic film are availabe on request.
Verification Failed:
Verification Failed:
Comments
Feedback from Buyer